4 inputs / 4 outputs internal DSP in Pi, DENEB and DALIM power amplifiers and DSP_PowerPack modules
This Digital Signal Processor is a very versatile processor useful for any kind of sound system and configurable for any sound application possible. It is real time fully programmable directly from the front panel in the amplifiers or through Ethernet or USB by means of RAM Audio own control software, RAM_OCS.
• High performance 96kHz/24 bits AD/DA converters
• 64 bit double-precision 96kHz DSP process
• 0.85 ms minimum process latency time
• Custom FIR process up to 1000 taps
• Dante, AES67 and AES3 input versions
Input Section (x4):
• Gain, Mute and Phase inversion
• Delay: In A: 333ms (114m), In B/C/D: 90ms (31m)
• Input EQ: 16 filters (Param., Shelving, LP, HP, BP, SB, AP)
Output Section (x4):
• Crossover Filters: FIR and IIR (up to 48dB/oct, Butterw./LR/Bessel)
• Output Delay: 0 to 31 meters (90ms) per channel
• Output IIR EQ: 12 filters per channel (Param., Shel, LP, HP, BP, SB, AP)
• Output FIR EQ: 20 filters per channel (Parametric, Shelving, LP, HP, BP, SB, AP), or Custom. Up to 1000 taps
• RMS and Peak limiter per channel
• Two ports Ethernet switch for daisy chain connection
• USB 2.0 Type B port
Miscellaneous:
• 100 Manufacturer system preset memories library
• 20 User preset memories library
• 20 User snapshot memories library
• Manufacturer/User passwords
• User control groups for virtual Equalization, Gain and Delay
• Zones definition for library management and alerts information
• Smaart® analysis software integration
There are three different levels of control, User, Advanced and Intermediate:
User Level functionalities:
Input Routing matrix Analog/Dante/AES67/AES3
Input EQ section with 8 filters and 20 memories
Input EQ Mode section, predefined by the manufacturer
System Preset selection predefined by the manufacturer (Locked/Unlocked)
Snapshot library management up to 100 presets
Master Control Groups
Advanced Level functionalities:
Input EQ Mode section creation, up to 20 presets
Ways routing section (Locked/Unlocked)
IIR EQ section: XOver, Gain, Delay, and 7 EQ filters
FIR EQ section: linear phase XOver and EQ filters, or custom up to 1000 taps
RMS and Peak Dynamic control
Snapshot library management up to 100 presets (Locked/Unlocked)
System Preset library management up to 100 presets
5 Security levels definition to limit final user functionality
Intermediate Level functionalities:
Same functionalities than Advanced Level but made for basic users
Some display screenshots:
Home Screen
· Way Output Signal: shines green with signal presence
· Mute Button: mutes the amplifier channel output
· Output Channel Level
· ICL Indicator: shines when clip limiter system is working
· LIM: shows RMS/Peak limiters compression level
· T: shows the channel temperature (percentage)
· System Preset/Mode/Way/User ID Out names of current process
· Snapshot: shows the name of current Snapshot (if loaded one)
· Default Screen Icon: button to access to the Default screen
DSP Edit Screen
· Source Input: to select the analog/digital source input
· System Input: to select the input of each system
· User ID Input Label: shows the name assigned by the user
· User EQ: to select the input EQ User Memory
· Group Values: shows the control groups values (green if present)
· JOIN (optional): to join different outputs to a single input
· System Preset Selector
· M: to select the Mode EQ
· Way: to optionally select the output way
User Input Setting Screen
· User ID Input Label: shows the name assigned by the user
· User EQ Access Button
· In: Input Level VUmeter
· GAIN IN: to change the input gain
· DELAY: to change the input delay (ms)
· MUTE: to mute input
· Rev: to change input polarity
User EQ Screen
· EQ Memory Name
· EQ ON/OFF: to Enable/disable User EQ
· On/Off HP 1-6: to access to specific filter and enable/disable it
· Type: to assign the filter type to the selected EQ
· FREQ: to assign the frequency to the selected EQ
· GAIN: to assign the gain to the selected EQ
· Q: to assign the Q to the selected EQ